{"title":"Tools \u0026 Accessories","description":null,"products":[{"product_id":"5-piece-multi-purpose-hex-shank-drill-bit-kit-4-10mm","title":"5-Piece Multi-Purpose Hex Shank Drill Bit Kit – 4-10mm","description":"\u003cp\u003e\u003cstrong\u003eOne bit for brick, block, tile, fibre cement, timber, plastic and metal\u003c\/strong\u003e so the fix-out crew stops swapping bits every second hole. Five sizes from 4mm to 10mm on a 1\/4\" hex shank that locks straight into an impact driver.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Material\u003c\/strong\u003e — brick, block, soft tile, fibre cement, timber, plastic and metal on one bit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/4\" Hex Shank\u003c\/strong\u003e — drops into an impact driver, no chuck, no slipping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 Sizes: 4, 5, 6, 8, 10mm\u003c\/strong\u003e — the plug and anchor sizes that actually come up\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbide Tip\u003c\/strong\u003e — survives masonry without giving up on timber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne Kit in the Pouch\u003c\/strong\u003e — covers a fix-out without carrying three sets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhere it earns its keep\u003c\/h2\u003e\n\u003cp\u003eFixing off into a wall where you cannot tell what is behind the render until you are in it. Hanging services through a mixed substrate — fibre cement sheet over timber, brick veneer over stud. Anywhere the alternative is drilling a hole, finding the wrong material, and going back to the ute for a different bit.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003e4mm, 5mm, 6mm, 8mm, 10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShank\u003c\/th\u003e\n\u003ctd\u003e1\/4\" hex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTip\u003c\/th\u003e\n\u003ctd\u003eCarbide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrills\u003c\/th\u003e\n\u003ctd\u003eBrick, block, soft tile, fibre cement, timber, plastic, metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePieces\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePacking\u003c\/th\u003e\n\u003ctd\u003ePlastic box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eQuestions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a hammer drill?\u003c\/strong\u003e It works in rotary or hammer mode. Use hammer for brick and block, rotary for tile and fibre cement so you do not blow the face out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a substitute for a proper SDS bit?\u003c\/strong\u003e No. For repeat holes in hard concrete use an SDS carbide bit. This kit is for mixed-substrate fix-out work.\u003c\/p\u003e","brand":"EZARC","offers":[{"title":"Default Title","offer_id":53921405665594,"sku":"BS-TLS-MPDRILL5","price":15.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0925\/3512\/8378\/files\/5-Piece_Multi-Purpose_Hex_Shank_Drill_Bit_Kit_4-10mm_-_BuildStock_jpg.png?v=1787672161"},{"product_id":"5-inch-turbo-diamond-blade-125mm-2-pack","title":"5 Inch Turbo Diamond Blade – 125mm (2 Pack) | Concrete, Brick \u0026 Masonry","description":"\u003cp\u003e\u003cstrong\u003eThe fast blade, turbo rim, 125mm, for concrete, brick and masonry\u003c\/strong\u003e where you want the cut done rather than gallery-finished. Serrated turbo segments clear spoil and shed heat, so it keeps cutting instead of glazing over. Two per pack.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbo Rim\u003c\/strong\u003e serrated segments clear dust and heat, so the blade keeps its bite through long cuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2mm Kerf\u003c\/strong\u003e thin enough to be quick, robust enough for masonry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10mm Segment Height\u003c\/strong\u003e usable diamond depth for a working life, not a one-job blade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStepped 22.23 \/ 20 \/ 16mm Arbor\u003c\/strong\u003e straight onto a 125mm grinder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 Per Pack\u003c\/strong\u003e carry a spare\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCutting masonry means cutting silica\u003c\/h2\u003e\n\u003cp\u003eConcrete, brick, block and mortar all contain crystalline silica, and dry cutting them with an angle grinder is one of the highest-exposure tasks on a construction site. Since 1 September 2024 the NSW WHS (Crystalline Silica Substances) Regulation has required PCBUs to control silica processing, run a risk control plan, carry out air monitoring and provide health monitoring.\u003c\/p\u003e\n\u003cp\u003eWater suppression or on-tool extraction first, RPE alongside it, and HEPA air scrubbing for indoor work. Confirm the controls your risk assessment requires — this is a blade, not advice.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e125mm (5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArbor\u003c\/th\u003e\n\u003ctd\u003e22.23 \/ 20 \/ 16mm stepped\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e2mm (0.087\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSegment height\u003c\/th\u003e\n\u003ctd\u003e10mm (3\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRim\u003c\/th\u003e\n\u003ctd\u003eTurbo, serrated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuts\u003c\/th\u003e\n\u003ctd\u003eCeramic, granite, marble, concrete, brick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack\u003c\/th\u003e\n\u003ctd\u003e2 blades\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eQuestions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTurbo or super thin?\u003c\/strong\u003e Turbo for speed on concrete, brick and block. Super thin for a clean visible edge on porcelain and stone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut wet?\u003c\/strong\u003e Yes, and it is the better option indoors — water suppression cuts respirable dust at the source.\u003c\/p\u003e","brand":"EZARC","offers":[{"title":"Default Title","offer_id":53921405829434,"sku":"BS-CON-DIA125TB","price":30.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0925\/3512\/8378\/files\/5InchTurboDiamondBlade.png?v=1787677408"},{"product_id":"18-inch-carbide-masonry-reciprocating-saw-blade","title":"18 Inch Demolition Masonry Reciprocating Saw Blade – Carbide 2TPI","description":"\u003cp\u003e\u003cstrong\u003eAn 18 inch tungsten carbide blade that cuts aerated concrete and brick on a recipro saw\u003c\/strong\u003e so a wall opening gets cut where a demo saw will not fit and a grinder will not reach. 2TPI, 1.5mm body, full-length carbide grit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e18 Inch Length \u003c\/strong\u003ecuts a full block or through a double-skin wall in one pass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTungsten Carbide\u003c\/strong\u003e grit cutting edge, not teeth, so masonry does not strip it in one cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2TPI Coarse Pitch\u003c\/strong\u003e clears spoil fast in porous material instead of loading up\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5mm Body\u003c\/strong\u003e enough spine to stay straight through a long cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuts Where Bigger Tools Cannot\u003c\/strong\u003e plunge cuts, corners, overhead, inside occupied spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhere it gets used\u003c\/h2\u003e\n\u003cp\u003eCutting openings in aerated concrete (Hebel) panel for doors, windows and service penetrations. Brick and block on soft demolition and strip-out. Anywhere the tool has to plunge, work into a corner, or run inside a building where a petrol demo saw is not an option.\u003c\/p\u003e\n\u003ch2\u003eMasonry cutting and silica\u003c\/h2\u003e\n\u003cp\u003eBrick, block and aerated concrete all contain crystalline silica. Since 1 September 2024 the NSW WHS (Crystalline Silica Substances) Regulation has required PCBUs to control silica processing, run a silica risk control plan, carry out air monitoring and provide health monitoring. Indoors, that generally means on-tool or water suppression plus HEPA air scrubbing. Confirm what your risk assessment requires.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e18\" (457mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eTungsten carbide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTooth pitch\u003c\/th\u003e\n\u003ctd\u003e2 TPI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e1.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuts\u003c\/th\u003e\n\u003ctd\u003eAerated concrete, porous concrete, brick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShank\u003c\/th\u003e\n\u003ctd\u003eUniversal recipro saw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eQuestions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWill it cut reinforced concrete?\u003c\/strong\u003e No. This is for porous and aerated masonry. Reinforced concrete needs a diamond blade or a core drill.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it cut through render or tile?\u003c\/strong\u003e It will get through render. Tile chips badly, score the face first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat about steel in the wall?\u003c\/strong\u003e Hitting reo or a nail will damage the carbide. For mixed material use a bi-metal or carbide-tooth metal blade.\u003c\/p\u003e","brand":"EZARC","offers":[{"title":"Default Title","offer_id":53921406583098,"sku":"BS-CON-RECIP18MAS","price":30.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0925\/3512\/8378\/files\/18InchDemolitionMasonryReciprocatingSawBlade-BuildStock.png?v=1787676449"},{"product_id":"12-piece-bi-metal-demolition-reciprocating-saw-blade-set","title":"12-Piece Bi-Metal Demolition Reciprocating Saw Blade Set – Wood, Nail-Embedded Timber \u0026 Metal","description":"\u003cp\u003e\u003cstrong\u003eTwelve bi-metal blades covering the three things a strip-out actually hits\u003c\/strong\u003e clean timber, nail-embedded timber, and metal. Five profiles in one tube so the saw keeps cutting instead of the operator going back to the ute.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 Blades, 5 Profiles\u003c\/strong\u003e wood, nail-embedded timber and metal covered in one set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBi-Metal Construction\u003c\/strong\u003e hardened tooth on a flexible body, so a blade bends rather than snapping when it binds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Shank\u003c\/strong\u003e fits every common recip saw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSized for Strip-Out\u003c\/strong\u003e the mix a demolition crew burns through in a week\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSet contents\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e4 × R644GS\u003c\/th\u003e\n\u003ctd\u003eFast wood cutting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e2 × R1606W\u003c\/th\u003e\n\u003ctd\u003eWood and nail-embedded timber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e2 × R1610M\u003c\/th\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e2 × R1614M\u003c\/th\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e2 × R1618M\u003c\/th\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBlades\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBi-metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eTimber, nail-embedded timber, hard metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eQuestions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich blade for nail-embedded timber?\u003c\/strong\u003e The R1606W. A pure wood blade will lose teeth on the first nail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does a blade last?\u003c\/strong\u003e Depends entirely on what is in the timber. Heat is the enemy — let it cut, do not lean on it, and keep the shoe against the work to stop the blade whipping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo they fit my saw?\u003c\/strong\u003e Universal half-inch shank — fits Milwaukee, Makita, DeWalt, Bosch and the rest.\u003c\/p\u003e","brand":"EZARC","offers":[{"title":"Default Title","offer_id":53921406845242,"sku":"BS-CON-RECIP12SET","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0925\/3512\/8378\/files\/12-Piece_Bi-Metal_Demolition_Reciprocating_Saw_Blade_Set_-_BuildStock.png?v=1787673646"},{"product_id":"12-inch-wood-metal-reciprocating-demolition-saw-blade","title":"12 Inch Bi-Metal Reciprocating Saw Blade – 8+10TPI - Wood \u0026 Metal Demolition (5 Pack)","description":"\u003cp\u003e\u003cstrong\u003eThe general-purpose demolition blade, 300mm, 8+10TPI variable pitch, bi-metal with 8% cobalt.\u003c\/strong\u003e Cuts 4-12mm sheet metal, thick-walled pipe and profile, nails and composite material up to 250mm across. Five per pack, because on a strip-out you do not use one.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8+10 TPI Variable Pitch\u003c\/strong\u003e one blade that handles timber, metal and everything welded to both\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8% Cobalt Bi-Metal\u003c\/strong\u003e harder tooth, better heat resistance, more cuts before it goes blunt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250mm Cutting Length\u003c\/strong\u003e takes material up to 250mm across in one pass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.6mm Thick Body\u003c\/strong\u003e heavy spine that resists whipping in a plunge cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-12mm Sheet Metal\u003c\/strong\u003e thick-walled closed and open profiles, pipe, RHS, angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 Per Pack\u003c\/strong\u003e the working quantity for demolition and strip-out\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThe blade that stays in the saw\u003c\/h2\u003e\n\u003cp\u003eOn a strip-out you are not sorting material before you cut it. Stud wall with plumbing in it, ceiling grid with hangers, framing with fixings still through it — a variable-pitch bi-metal blade handles all of it without a change. It will not out-cut a dedicated wood blade in clean timber or a carbide blade in heavy steel, but it will keep going when the material changes mid-cut, and that is what a demolition blade is for.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTotal length\u003c\/th\u003e\n\u003ctd\u003e300mm (12\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting length\u003c\/th\u003e\n\u003ctd\u003e250mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade material\u003c\/th\u003e\n\u003ctd\u003eBi-metal with 8% cobalt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTeeth per inch\u003c\/th\u003e\n\u003ctd\u003e8+10 TPI variable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e1.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuts\u003c\/th\u003e\n\u003ctd\u003eSheet metal 4-12mm, thick-walled closed and open metal profiles and pipes, nails, composite material to 250mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack\u003c\/th\u003e\n\u003ctd\u003e5 blades\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShank\u003c\/th\u003e\n\u003ctd\u003eUniversal recipro saw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eQuestions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it compare to the carbide blade?\u003c\/strong\u003e This is the everyday blade for mixed material. For thick high-alloy steel, stainless, rebar and car beams, step up to the carbide-tooth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWood only, is there something faster?\u003c\/strong\u003e Yes, a coarse wood blade. This one trades a little speed in clean timber for not caring what it hits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo they fit my saw?\u003c\/strong\u003e Universal half-inch shank: Milwaukee, Makita, DeWalt, Bosch and the rest.\u003c\/p\u003e","brand":"EZARC","offers":[{"title":"Default Title","offer_id":53921407402298,"sku":"BS-CON-RECIP12DM5","price":30.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0925\/3512\/8378\/files\/12InchBi-MetalReciprocatingSawBlade-BuildStock.png?v=1787677141"},{"product_id":"5-inch-super-thin-diamond-blade-125mm-2-pack","title":"5 Inch Super Thin Diamond Blade – 125mm (2 Pack) | Porcelain, Tile \u0026 Stone","description":"\u003cp\u003e\u003cstrong\u003eA 2mm continuous-rim blade for cuts that stay on show\u003c\/strong\u003e — porcelain, ceramic, granite, marble, quartz and stone, cut clean enough that the edge does not need hiding under a trim. 125mm, stepped arbor, two per pack.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2mm Kerf\u003c\/strong\u003e takes less material, generates less heat, chips less on the face\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Rim\u003c\/strong\u003e no segment gaps to catch and chip a glazed edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10mm Diamond Depth\u003c\/strong\u003e real working life, not a blade that runs out after one bathroom\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStepped 22.23 \/ 20 \/ 16mm Arbor\u003c\/strong\u003e straight onto a 125mm grinder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuts Hard Stone\u003c\/strong\u003e granite, sandstone, quartz, marble, slate as well as tile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 Per Pack\u003c\/strong\u003e carry a spare\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhere the thin kerf matters\u003c\/h2\u003e\n\u003cp\u003eAnywhere the cut edge is visible when the job is finished. Porcelain and ceramic wall and floor tile, stone benchtop cut-outs, sills and treads, mitred external corners. A thicker blade removes more material and puts more heat into the piece, and heat is what causes the chipping and micro-cracking on a glazed face.\u003c\/p\u003e\n\u003cp\u003eScore the face first, then cut through. Let the blade do the work — pushing generates heat and heat is what wrecks the edge and the blade.\u003c\/p\u003e\n\u003ch2\u003eCutting stone and tile means cutting silica\u003c\/h2\u003e\n\u003cp\u003ePorcelain, granite, quartz and engineered stone are high in crystalline silica. Since 1 September 2024 the NSW WHS (Crystalline Silica Substances) Regulation has required PCBUs to control silica processing, run a risk control plan, carry out air monitoring and provide health monitoring. Dry-cutting stone with a grinder produces very high respirable dust levels — water suppression or on-tool extraction first, RPE alongside it, and HEPA air scrubbing indoors.\u003c\/p\u003e\n\u003cp\u003eNote that the manufacture, supply and installation of engineered stone benchtops is prohibited in Australia. Confirm what your risk assessment and licence conditions require.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e125mm (5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArbor\u003c\/th\u003e\n\u003ctd\u003e22.23 \/ 20 \/ 16mm stepped\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e2mm (0.08\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSegment height\u003c\/th\u003e\n\u003ctd\u003e10mm (3\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRim\u003c\/th\u003e\n\u003ctd\u003eSuper thin continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuts\u003c\/th\u003e\n\u003ctd\u003eGranite, ceramic tile, sandstone, quartz, marble, brick, slate, cement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack\u003c\/th\u003e\n\u003ctd\u003e2 blades\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eQuestions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuper thin or turbo?\u003c\/strong\u003e Super thin for a clean visible edge on tile and stone. Turbo for speed on concrete, brick and block where the cut gets covered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWet or dry?\u003c\/strong\u003e Both. Wet is cleaner, cooler, kinder to the blade and far better for dust control.\u003c\/p\u003e","brand":"EZARC","offers":[{"title":"Default Title","offer_id":53922605039930,"sku":"BS-CON-DIA125ST","price":30.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0925\/3512\/8378\/files\/5InchSuperThinDiamondBlade-BuildStock.png?v=1787674110"},{"product_id":"12-inch-carbide-reciprocating-saw-blade-8tpi","title":"12 Inch Carbide Reciprocating Saw Blade - 8TPI | Reo Bar, Stainless \u0026 Thick Steel","description":"\u003cp\u003e\u003cstrong\u003eCarbide teeth, 8TPI, rated at up to 50 times the life of a bi-metal blade in thick steel.\u003c\/strong\u003e This is the blade for the material that destroys everything else — high-alloy construction steel, stainless, rebar and car beams. One blade, 300mm, side-set teeth.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbide Teeth\u003c\/strong\u003e — the tooth material that survives what work-hardens and strips a bi-metal blade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 50x Longer Life\u003c\/strong\u003e — in thick metal, against a standard bi-metal blade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 TPI \/ 3.2mm Pitch\u003c\/strong\u003e — coarse enough to clear chips in thick section without loading up\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.3mm Thick Body\u003c\/strong\u003e — heavy spine that resists deflection and whipping in a long cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250mm Cutting Length\u003c\/strong\u003e — takes material up to 250mm across\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide-Set Teeth\u003c\/strong\u003e — cuts a clearance kerf so the blade does not bind and grab\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Half-Inch Shank\u003c\/strong\u003e — fits every common recip saw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhen to reach for carbide over bi-metal\u003c\/h2\u003e\n\u003cp\u003eBi-metal is the everyday blade — it handles mixed material, timber with fixings, general sheet and profile, and it is a third of the price. Carbide is what you put in when the material is fighting back: rebar, stainless, high-alloy structural steel, medium wall thickness, car and truck chassis.\u003c\/p\u003e\n\u003cp\u003eThe economics only work in the hard stuff. In softer material a carbide blade will not out-cut a bi-metal one by anywhere near enough to justify the price. In rebar it will still be cutting long after you have been through a box of bi-metal blades.\u003c\/p\u003e\n\u003ch2\u003eGetting the life out of it\u003c\/h2\u003e\n\u003cp\u003eLet the blade cut. Carbide teeth are hard and brittle — leaning on the saw chips them, and a chipped tooth takes the ones either side with it. Keep the shoe firmly against the work so the blade cannot chatter, run at a moderate stroke rate, and let the teeth do the work. Heat and vibration are what end a carbide blade, not honest cutting.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength x width x thickness\u003c\/th\u003e\n\u003ctd\u003e300 x 25 x 1.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting length\u003c\/th\u003e\n\u003ctd\u003e250mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTooth material\u003c\/th\u003e\n\u003ctd\u003eCarbide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTooth pitch\u003c\/th\u003e\n\u003ctd\u003e3.2mm \/ 8 TPI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuts\u003c\/th\u003e\n\u003ctd\u003eHigh-alloy construction steel, stainless steel, rebar, car beams, thick-walled profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack\u003c\/th\u003e\n\u003ctd\u003e1 blade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eQuestions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs it worth three times the price of a bi-metal blade?\u003c\/strong\u003e In reo bar and stainless, comfortably. In timber and light sheet, no, use the bi-metal 5-pack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it cut cast iron?\u003c\/strong\u003e Yes, and it is one of the better options for it. Go slow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy did the teeth chip?\u003c\/strong\u003e Almost always too much feed pressure or the blade chattering because the shoe was not held against the work.\u003c\/p\u003e","brand":"EZARC","offers":[{"title":"Default Title","offer_id":53922910011706,"sku":"BS-CON-RECIP12CARB","price":50.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0925\/3512\/8378\/files\/12InchCarbideReciprocatingSawBladeRebarStainless_ThickSteel-buildstock_a567cfc1-0f4a-4bcf-9efc-7010e088d7bd.jpg?v=1787648998"},{"product_id":"5-inch-cut-off-wheel-125mm-metal-stainless-25-pack","title":"5 Inch Cut-Off Wheel (25 Pack) | for Metal \u0026 Stainless","description":"\u003cp\u003e\u003cstrong\u003eA 1.2mm thin-kerf cutting disc for metal and stainless, twenty-five to a box.\u003c\/strong\u003e \u003cbr\u003eThin means fast, cool and less burr, and less of the workpiece turned into sparks. Rated to 12,200 rpm and manufactured to EN 12413.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.2mm Kerf \u003c\/strong\u003ecuts faster with less heat than a 2.5mm disc, so stainless keeps its corrosion resistance at the cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal and Stainless\u003c\/strong\u003e iron and sulphur free, so it will not contaminate stainless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125mm x 22.23mm Bore\u003c\/strong\u003e standard 5 inch angle grinder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12,200 rpm Max\u003c\/strong\u003e 80 m\/s peripheral speed rating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 Per Box\u003c\/strong\u003e the trade pack, because nobody buys just one\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy thin discs win on metal\u003c\/h2\u003e\n\u003cp\u003eA thin kerf removes less material, which means less friction, less heat and a faster cut. On stainless that matters twice over: heat discolours the cut edge and can damage the passive layer that makes stainless stainless. On RHS, angle, rebar and threaded rod it just means you get through quicker with less burr to grind off afterwards.\u003c\/p\u003e\n\u003cp\u003eThe trade-off is that a 1.2mm disc is not a grinding wheel. Never use the face of it, never lean it sideways in a cut, and never fit it to a grinder without the guard on.\u003c\/p\u003e\n\u003ch2\u003eBefore you fit one\u003c\/h2\u003e\n\u003cp\u003eCheck the disc for cracks and check the expiry date — bonded abrasives have a shelf life, usually three years from manufacture, and the date is printed on the ring. Check your grinder's no-load speed does not exceed the 12,200 rpm rating. Fit the guard, wear eye and face protection, and stand out of the plane of rotation while it spins up.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e125mm (5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e1.2mm (0.045\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBore\u003c\/th\u003e\n\u003ctd\u003e22.23mm (7\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax speed\u003c\/th\u003e\n\u003ctd\u003e12,200 rpm \/ 80 m\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003ctd\u003eEN 12413\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuts\u003c\/th\u003e\n\u003ctd\u003eMetal, stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack\u003c\/th\u003e\n\u003ctd\u003e25 wheels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eQuestions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan I grind with it?\u003c\/strong\u003e No. Cutting only, edge only. A thin disc used on its face will shatter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it cut aluminium?\u003c\/strong\u003e It will, but aluminium loads the disc badly. Use a dedicated non-ferrous disc if you cut a lot of it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo they expire?\u003c\/strong\u003e Yes. Check the printed date on the ring and do not use a disc past it.\u003c\/p\u003e","brand":"EZARC","offers":[{"title":"Default Title","offer_id":53922910110010,"sku":"BS-CON-CUTOFF125","price":27.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0925\/3512\/8378\/files\/5incutoffwheelmetal25pack-BuildStock-2.png?v=1789003369"},{"product_id":"93-piece-socket-and-tool-set-metric","title":"93-Piece Socket and Tool Set","description":"\u003cp\u003e\u003cstrong\u003eNinety-three pieces across 1\/4\" and 1\/2\" drive, in a blow-mould case that stays organised.\u003c\/strong\u003e Short and deep sockets in both drives, two ratchets, extension bars, a universal joint, spark plug sockets and a full screwdriver bit set — the kit that lives in the ute and handles most of what a site day throws at it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Drive Sizes\u003c\/strong\u003e — 1\/4\" ratchet for the small work, 1\/2\" ratchet for anything that needs real torque\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort and Deep Sockets, Both Drives\u003c\/strong\u003e — deep sockets reach a nut on a long stud without hunting for an extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpark Plug Sockets\u003c\/strong\u003e — 16mm and 21mm, rubber retained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Bit Range\u003c\/strong\u003e — Torx, hex, Phillips, Pozidriv and slotted, plus press-fit security bits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension Bars and Universal Joint\u003c\/strong\u003e — for the fastener you cannot get square onto\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSliding T-Bar and Connecting Rods\u003c\/strong\u003e — breaks a tight fastener without a ratchet mechanism to damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlow-Mould Case\u003c\/strong\u003e — every piece located, so a missing socket is obvious before you leave site\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's in the case\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e1\/2\" short sockets\u003c\/th\u003e\n\u003ctd\u003e10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e1\/2\" deep sockets\u003c\/th\u003e\n\u003ctd\u003e14, 15, 16, 17, 18, 19mm and up\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e1\/4\" short sockets\u003c\/th\u003e\n\u003ctd\u003e4 to 13mm range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e1\/4\" deep sockets\u003c\/th\u003e\n\u003ctd\u003e6 to 13mm range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRatchets\u003c\/th\u003e\n\u003ctd\u003e1 x 1\/2\" drive, 1 x 1\/4\" drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpark plug sockets\u003c\/th\u003e\n\u003ctd\u003e16mm, 21mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScrewdriver bits\u003c\/th\u003e\n\u003ctd\u003eTorx T40-T55, hex H8-H14, security bits, Phillips, Pozidriv, slotted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAccessories\u003c\/th\u003e\n\u003ctd\u003eExtension bars, connecting rods, universal joint, sliding bar, folding hex keys\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCase\u003c\/th\u003e\n\u003ctd\u003eBlow-mould with carry handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eUsing it without breaking it\u003c\/h2\u003e\n\u003cp\u003eLoad a ratchet smoothly. Yanking on a socket handle overloads the pawl, and an overloaded pawl is what turns a ratchet into a paperweight. If a fastener will not move, get a breaker bar on it — that is what the sliding T-bar is for.\u003c\/p\u003e\n\u003ch2\u003eQuestions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMetric or imperial?\u003c\/strong\u003e Metric.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImpact rated?\u003c\/strong\u003e No. These are hand sockets. Do not put them on a rattle gun — use impact-rated sockets for that.\u003c\/p\u003e","brand":"Dingqi","offers":[{"title":"Default Title","offer_id":53922910404922,"sku":"BS-TLS-SOCKET93","price":150.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0925\/3512\/8378\/files\/93-PieceSocketandToolSet-BuildStock_157f00f7-dea4-47b5-97ef-22b4f13626c1.png?v=1787667391"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0925\/3512\/8378\/collections\/12InchCarbideReciprocatingSawBladeRebarStainless_ThickSteel-buildstock.png?v=1787650396","url":"https:\/\/buildstock.com.au\/collections\/tools.oembed","provider":"BuildStock","version":"1.0","type":"link"}