5 Inch Turbo Diamond Blade – 125mm (2 Pack) | Concrete, Brick & Masonry

The fast blade, turbo rim, 125mm, for concrete, brick and masonry where you want the cut done rather than gallery-finished. Serrated turbo segments clear spoil and shed heat, so it keeps cutting instead of glazing over. Two per pack.

• Turbo Rim serrated segments clear dust and heat, so the blade keeps its bite through long cuts
• 2mm Kerf thin enough to be quick, robust enough for masonry
• 10mm Segment Height usable diamond depth for a working life, not a one-job blade
• Stepped 22.23 / 20 / 16mm Arbor straight onto a 125mm grinder
• 2 Per Pack carry a spare

Cutting masonry means cutting silica

Concrete, brick, block and mortar all contain crystalline silica, and dry cutting them with an angle grinder is one of the highest-exposure tasks on a construction site. Since 1 September 2024 the NSW WHS (Crystalline Silica Substances) Regulation has required PCBUs to control silica processing, run a risk control plan, carry out air monitoring and provide health monitoring.

Water suppression or on-tool extraction first, RPE alongside it, and HEPA air scrubbing for indoor work. Confirm the controls your risk assessment requires — this is a blade, not advice.

Specifications

Questions

Turbo or super thin? Turbo for speed on concrete, brick and block. Super thin for a clean visible edge on porcelain and stone.

Can I cut wet? Yes, and it is the better option indoors — water suppression cuts respirable dust at the source.