LVL H2S 90 x 63mm laminated veneer lumber
LVL E10 AS/NZS 4357.0 edge stamp

Vendor:BuildStock

LVL E10 H2S Structural Beam – 90 x 45mm x 6m | AS/NZS 4357.0 Laminated Veneer Lumber

$30.00

E10 grade laminated veneer lumber, 90 x 45mm, 6 metre lengths, H2S treated, certified to AS/NZS 4357.0. Straighter than sawn timber, stronger for its section, and it stays that way — LVL does not bow, twist or spring the way a solid stick can. A-Bond glue line, E0 formaldehyde emission.

  • E10 Grade the standard grade for general structural work
  • AS/NZS 4357.0 Certified
  • A-Bond Glue Line the fully weather-resistant bond classification
  • E0 Formaldehyde the lowest emission class, for use in enclosed and occupied spaces
  • Dimensionally Stable laminated construction means no bow, no twist, no spring, and consistent depth down the length
In stock, ready to ship

Pickup available at BuildStock Penrith

Usually ready in 2 hours
Product details

Where LVL beats sawn timber

Anywhere the member has to be straight and stay straight. Lintels and headers over openings, rafters and joists at span, stud walls that have to be dead plumb, and any application where a bowed stick means a wavy wall or a door that will not close in six months.

You also get more out of a smaller section. LVL at E10 carries a load a comparable sawn section will not, so the member can be shallower — which matters when ceiling height or floor depth is tight.

More features

  • Consistent Strength knots and defects are distributed through the laminations instead of concentrated in one weak spot
  • 6 Metre Lengths 90 x 45mm section
Specifications
  • Grade: E10 (E = 10,500 MPa)
  • Section: 90 x 45mm
  • Length: 6.0m
  • Treatment: H2S (termite treated, internal above-ground use)
  • Standard: AS/NZS 4357.0 Structural laminated veneer lumber
  • Certification: BSI Benchmark Product Certification
  • Bond: A-Bond
  • Formaldehyde: E0
Compliance & standards
In the box
FAQs

Pairs well with