16-Piece Bi-Metal Hole Saw Set – 19-64mm | Plumbing & Electrical
16-Piece Bi-Metal Hole Saw Set – 19-64mm | Plumbing & Electrical
16-Piece Bi-Metal Hole Saw Set – 19-64mm | Plumbing & Electrical
16-Piece Bi-Metal Hole Saw Set – 19-64mm | Plumbing & Electrical
16-Piece Bi-Metal Hole Saw Set – 19-64mm | Plumbing & Electrical
16-Piece Bi-Metal Hole Saw Set – 19-64mm | Plumbing & Electrical
16-Piece Bi-Metal Hole Saw Set – 19-64mm | Plumbing & Electrical

Vendor:EZARC

16-Piece Bi-Metal Hole Saw Set – 19-64mm | Plumbing & Electrical

$95.00

Ten hole saw sizes from 19mm to 64mm, two arbors. 48mm of cutting depth — 50% deeper than the 32mm most sets give you, so it goes through a stud wall or a double-plated top plate in one pass. M42 bi-metal with 8% cobalt, in a moulded case that survives the back of a Ute.

  • 10 Sizes, 19-64mm — the sizes plumbers and sparkies actually cut, not a box padded with sizes nobody uses
  • 48mm Cutting Depth — 1-7/8" versus the usual 1-1/4", so thicker material comes out in one cut
  • M42 Bi-Metal, 8% Cobalt — harder edge, better heat resistance, roughly twice the life of a standard bi-metal saw
  • Two Arbors Included — 7/16" and 3/8", both with pilot drills, plus a spare pilot bit
  • Easy Plug Removal — slotted body so the core knocks out instead of jamming
In stock, ready to ship

Pickup available at BuildStock Penrith

Usually ready in 2 hours
Product details

More features

  • 4/6 TPI Variable Pitch — one tooth pattern that handles timber, metal and plastic without swapping saws
  • Moulded Carry Case — everything located, nothing rattling loose
Specifications
  • Tooth material: M42 high speed steel, 8% cobalt
  • Tooth pitch: 4/6 TPI
  • Cutting depth: 48mm (1-7/8")
  • Size range: 19mm - 64mm (10 sizes)
  • Cuts: Timber, metal, plastic, plasterboard, aluminium, brass
  • Pieces: 16 (10x Hole Saw Sizes, 2x Arbors with Pilot Drill, 1x Spare Pilot Drill, 1x Hex Key, 1x Washer, & 1x Adapter Nut
Compliance & standards
In the box
  • Hole saws (10): 3/4" 19mm · 7/8" 22mm · 1" 25mm · 1-1/8" 29mm · 1-3/8" 35mm · 1-1/2" 38mm · 1-3/4" 44mm · 2" 51mm · 2-1/4" 57mm · 2-1/2" 64mm
  • Arbors: 1 × 7/16" arbor with 6542 pilot drill · 1 × 3/8" arbor with 6542 pilot drill
  • Spares: 1 × replacement M2 pilot drill · 1 × change head nut and washer · 1 × 4mm hex key
  • Case: Moulded plastic case
FAQs

Will it cut steel?

Yes — M42 bi-metal with cobalt is rated for mild steel, stainless sheet, aluminium and brass. Keep the speed down and use cutting fluid on anything thick.

Which arbor do I use?

The 3/8" arbor suits the smaller saws, the 7/16" the larger. Both take the same pilot drill.

Does it fit other brands' arbors?

Standard thread — it fits common hole saw arbors.

Pairs well with