93-Piece Socket and Tool Set

Ninety-three pieces across 1/4" and 1/2" drive, in a blow-mould case that stays organised. Short and deep sockets in both drives, two ratchets, extension bars, a universal joint, spark plug sockets and a full screwdriver bit set — the kit that lives in the ute and handles most of what a site day throws at it.

• Two Drive Sizes — 1/4" ratchet for the small work, 1/2" ratchet for anything that needs real torque
• Short and Deep Sockets, Both Drives — deep sockets reach a nut on a long stud without hunting for an extension
• Spark Plug Sockets — 16mm and 21mm, rubber retained
• Full Bit Range — Torx, hex, Phillips, Pozidriv and slotted, plus press-fit security bits
• Extension Bars and Universal Joint — for the fastener you cannot get square onto
• Sliding T-Bar and Connecting Rods — breaks a tight fastener without a ratchet mechanism to damage
• Blow-Mould Case — every piece located, so a missing socket is obvious before you leave site

What's in the case

Using it without breaking it

Load a ratchet smoothly. Yanking on a socket handle overloads the pawl, and an overloaded pawl is what turns a ratchet into a paperweight. If a fastener will not move, get a breaker bar on it — that is what the sliding T-bar is for.

Questions

Metric or imperial? Metric.

Impact rated? No. These are hand sockets. Do not put them on a rattle gun — use impact-rated sockets for that.